Exportação direta da linha de produção
info@sinotools.com
info@sinotools.com
Exportação direta da linha de produção
Nov. 30, 2018
Pay attention to the following points when using a hammer wich from Chipping Hammer Supplier:
1. The connection between the hammer head and the handle must be firm. If the hammer head and the hammer handle are loose, the hammer handle has cracks and cracks and must not be used. The wedge of the hammer head and the hammer handle are added to the mounting hole, and the metal wedge is preferred. The length of the wedge is not more than 2/3 of the depth of the mounting hole.
2. In order to have a certain elasticity when hitting, the middle of the handle is slightly narrower than the end.
3. When using a sledgehammer, you must pay attention to the front, back, left and right, up and down. It is strictly forbidden to stand in the range of sledgehammer movement. It is forbidden to use the sledgehammer and the small hammer to play each other.
4. The hammerhead is not allowed to be quenched. Cracks and burrs are not allowed. It is found that the flashing of the flashing edge should be repaired in time.
In fact, we are aslo Caulking Guns Manufacturer and Grinding Wheel Exporters. If you have demand about our products, welcome to contact us.
Post mais recente
Destaques de outubro: Tool Japan e a 136th Canton Fair
Sinotools participou recentemente de duas exposições significativas: Tool Japan, realizada de 9 a 11 de outubro de 2024, no Japão, e a 136ª Feira Cantão de 15 a 19 de outubro de 2024.
Nov. 06, 2024
Nossa jornada na 135th Canton Fair em Guangzhou
Temos o prazer de anunciar que Sinotools participou recentemente como fornecedor na 135ª Feira de Canton em Guangzhou, China. Como um dos principais exportadores de ferramentas manuais na China, tivemos a honra de exibir nossa coleção clássica de ferramentas manuais e conectar -se a compradores de todo o mundo.
Apr. 22, 2024
Catálogo 
